Terry
31-12-2005, 09:27 AM
Does anyone have any info/diagrams of the correct wire routing in and around the rear engine bay? I do not have a wiring diagram but not sure if that will provide the info anyway. The Workshop manual does not help (unless I am missing a section).
During removing the various bits the wiring did not follow the correct route with the correct clips and I would like to get it right during installation.
If anyone has any detail pics (2.7 car) that would also be helpful. I am especially interested rear of the cylinders up to the rear lights.
A couple of pics of the area. I am cleaning up the metalwork ready for a coat of paint before refitting cleaned and checked wiring.
BTW I did take pics before disassembly but would prefer the original layout. It's surprising how much can be done/caused by wiring incorrectly installed and secured with tie wraps against corners of structure. Thanks for any assistance.
During removing the various bits the wiring did not follow the correct route with the correct clips and I would like to get it right during installation.
If anyone has any detail pics (2.7 car) that would also be helpful. I am especially interested rear of the cylinders up to the rear lights.
A couple of pics of the area. I am cleaning up the metalwork ready for a coat of paint before refitting cleaned and checked wiring.
BTW I did take pics before disassembly but would prefer the original layout. It's surprising how much can be done/caused by wiring incorrectly installed and secured with tie wraps against corners of structure. Thanks for any assistance.