Results 1 to 3 of 3

Thread: 360 seat removal

  1. #1
    Join Date
    May 2008
    Location
    london
    Name
    mustapha
    Posts
    396

    Default 360 seat removal

    Guys, I need to take my passenger seat out to get to an amplifier under there. How do I go about removing the seat? Grateful for any advice/instructions. Cheers.

  2. #2
    Join Date
    Dec 2008
    Location
    South
    Name
    Lancerlot
    Posts
    84

    Default

    Not sure about the 360, but on a Scud it's just 4 cap screws.

    Slide the seat forward, remove the 2 at the back, then slide the seat back and remove the 2 at the front.

    Check for any cabling that connects to the seat for SRS etc. and disconnect at the plug and socket.

    You may need a selection of different length allen keys/sockets/universal joints etc. to overcome clearance problems. Cover the door sill and door card with protective coverings, fold the seat, tilt and carefully remove. (4 hands can be better than 2 at this stage).

    Hope this helps,
    Good luck.
    Regards.

  3. #3
    Join Date
    May 2008
    Location
    london
    Name
    mustapha
    Posts
    396

    Default

    thanks so much for the advice. Will give it a shot.

Similar Threads

  1. 360 seat rails
    By Alric in forum Technical Q & A
    Replies: 6
    Last Post: 18-05-2009, 08:30 AM
  2. 360 / CS bumper and sideskirt removal
    By tonyh in forum Technical Library
    Replies: 1
    Last Post: 22-02-2009, 03:38 PM
  3. Toddler seat for the 360 ?
    By mc101 in forum Ferrari Talk
    Replies: 10
    Last Post: 10-06-2008, 12:24 PM
  4. Booster seat for 360 with sports seats
    By 964Cup in forum Ferrari Talk
    Replies: 7
    Last Post: 26-10-2007, 08:06 PM
  5. 360 carbon seat
    By gee355 in forum Ferrari Talk
    Replies: 10
    Last Post: 05-03-2006, 07:51 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •