Results 1 to 6 of 6

Thread: Ferrari F360 ASR cuts off engine (software)

  1. #1
    Join Date
    May 2021
    Location
    Hong Kong
    Name
    Andre
    Posts
    3

    Default Ferrari F360 ASR cuts off engine (software)

    Got a F360 Spider 2001. Been having issues with my ASR suddenly cutting off engine power allowing around 1300-1500RPM only, even when pressing the accelerator. It's a software cut-off. My garage thinks it's related to sensors that need replacing. I've had the issue 4 times now (over about 6000km within 8 months). Usually happens in a traffic jam with the car overheating. Need to switch off the engine, wait for 10 sec, turn it on again and the problem is gone.
    Any suggestions? See a short video attached.

  2. #2
    Mike01606's Avatar
    Mike01606 is offline Kid's bed - The Ferrari F50 Club Member
    Join Date
    Jan 2012
    Location
    Cheshire
    Name
    Mike M
    Posts
    3,685

    Default

    Does the ASR light on the display actually come on?

  3. #3
    Modificato is offline Nowhere to put the shopping -The Ferrari F40 Club Member
    Join Date
    May 2010
    Location
    north west
    Name
    CPD
    Posts
    3,106

    Default

    Notorious for being a bad battery causing this.

    Is the car left on a battery conditioner?

    How old is the battery?

    Battery tenders can mask a basically dead battery

    Other items in order of likelihood:

    ABS / ASR electronics
    ABS/ ASR Pump
    Slip / motion sensor gone bad - Integrated into the wheel hubs
    [These are three black boxes one is under the left engine bay cover, one is in front of the windscreen under the cover panel near the master on/off switch. The last is under the front bumper. All three are bolted onto the chassis.]

    I would pay / ask for a full system scan to narrow it down before spending lots of money on each item.

  4. #4
    Mike01606's Avatar
    Mike01606 is offline Kid's bed - The Ferrari F50 Club Member
    Join Date
    Jan 2012
    Location
    Cheshire
    Name
    Mike M
    Posts
    3,685

    Default

    Id add bad earthing also.

    I used to see an ASR light sporadically when there was no slip.

    I cleaned the under bonnet power cut off switch connections and where they bond to the chassis.


    Sent from my iPhone using Tapatalk

  5. #5
    Join Date
    May 2021
    Location
    Hong Kong
    Name
    Andre
    Posts
    3

    Default F360 sudden ASR cut-off (but engine keeps running at about 1200rpm)

    Quote Originally Posted by Mike01606 View Post
    Does the ASR light on the display actually come on?
    Hi Mike; yes the ASR light comes on (and doesn't turn off until I switch the engine off) together with a loud audio alarm.

  6. #6
    Join Date
    May 2021
    Location
    Hong Kong
    Name
    Andre
    Posts
    3

    Default F360 sudden ASR cut-off (but engine keeps running at about 1200rpm)

    Hello Modificato;
    Appreciate your input, thx

    - battery is almost new (about 4 months)
    - car is now at the garage; clean bill of health. No issues came up with the scan (as in, nothing no other problems either). They recommend cleaning the sensors and doing a reset. I've forwarded them your recommendations.

    Lets see

Similar Threads

  1. I've just bought a my first Ferrari... an F360
    By wormski in forum Ferrari Talk
    Replies: 21
    Last Post: 04-02-2015, 08:06 PM
  2. F360 engine alarm on how to reset the ECU ?
    By ppboc1 in forum Technical Q & A
    Replies: 2
    Last Post: 04-05-2011, 06:33 PM
  3. 360 Cuts Out When Cold
    By sidned in forum Technical Q & A
    Replies: 4
    Last Post: 08-01-2011, 01:58 AM
  4. f360 gt2 engine
    By col68 in forum Ferrari Talk
    Replies: 0
    Last Post: 16-07-2010, 12:46 AM
  5. f360 Engine check lamp on.
    By DrG. in forum Technical Q & A
    Replies: 26
    Last Post: 24-03-2010, 12:40 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •